View source for FC3-SC-C2 FACET3 Card

==FC3-SC-2C FACET Card==
{| class="wikitable" border="1"
| [[File:FC3-SC.png|200px|thumb|]]
|}

===Specifications===
* Double CAN device using DB9 connector
* Supports CAN 2.0A Specifications and ISO 11898-2
* Bit rate of up to 1Mbit/s
* Isolation per [https://standardscatalog.ul.com/standards/en/standard_1577_5 UL 1577]
* Transient immunity: 30kV/uS, isolated DC 5V power
* CANbus is driven by a dedicated 32bit microcontroller (ARM Cortex M0 -  STM32F042C6) running open source firmware that can be upgraded
* Driverless operation in Windows
* USB native device in Linux
* Over 10 ports can be installed
* Isolated DC 5V power
* Ambient Operation from –40°C to 85°C.

=== Electrical and environmental ===
* Isolation per [https://standardscatalog.ul.com/standards/en/standard_1577_5 UL 1577]
* Transient immunity: 30kV/uS.
* Isolated DC 5V power
* Ambient Operation from –40°C to 85°C.

=== Configuration ===
* Two Code implementations in one device switchable by a DIP Switch.
* DIP switch for enabling/disabling on-board 120 Ohm termination


=== Open source hardware and software ===
* Complete hardware design files are available
* Complete firmware is available
* Designed for Hacking - Easily scriptable [https://python-can.readthedocs.io/en/stable/ Python SW library] for easy and cross-platform communication to the device

==Connector Pinout==
[[File:CAN-Bus DB9 Pinout.png|600px]]

== FC3-SC Rev 1.2 Extension schematic ==
[[File:FC3-SC Switches.png|600px]]
==Explanation:==
===DB9 Port #2===
====CAN #2 switches====
'''SW3''': '''Code''' - switch between '''UART/USB''' OS presentation (default - ON - network CAN device (for -Nix based OS), for Windows OS need set switch to OFF)<br>
'''SW4''': '''Term''' - Termination by '''120 Ω''' if needed
<hr>
===DB9 Port #1===
====CAN #1 switches====
'''SW1''':  '''Code''' - switch between '''UART/USB''' OS presentation (default - ON - network CAN device (for -Nix based OS), for Windows OS need set switch to OFF)<br>
'''SW2''': '''Term''' - Termination by '''120 Ω''' if needed
<hr>

== Additional information ==
* [https://cdn.edge.compulab.com/fitlet3/documents/AppNote_fitlet3_configure_FC3-SC_FACET_CARD_rev1.pdf How to configure FC3-SC FACET_CARD]
<!--
==Block diagram==
[[File:TEL-CANBUS_Rev.1.0_block_Diagram.jpg|200px]]


===Instructions===

* [https://cdn.edge.compulab.com/mechanical/TELS/TEL-CANBUS/Installation-instructions/fitlet2-TEL-CANBUS-installation-instructions.pdf fitlet2 TEL-CANBUS installation instructions]

===Production files===

<b><u>Schematics</u></b>

* [https://cdn.edge.compulab.com/tensor-pc/TELs/FT.Q-CAN/FT.Q-CAN_V1_0_1_Schematics_8000128001.zip TEL-CANBUS Rev 1.0.1 Schematic files]

<b><u>Assembly</u></b>

* [https://cdn.edge.compulab.com/tensor-pc/TELs/FT.Q-CAN/FT.Q-CAN_V1_0_1_Assembly_drawings_8050128001.zip TEL-CANBUS Rev1.0 Assembly files]

<b><u>Layout</u></b>

* [https://cdn.edge.compulab.com/tensor-pc/TELs/FT.Q-CAN/FT.Q-CAN_V1_0_1_Layout_8030128001.zip TEL-CANBUS Rev1.0 Layout files]

<b><u>Mechanical</u></b>

* [https://cdn.edge.compulab.com/tensor-pc/TELs/FT.Q-CAN/FT.Q-CAN_V1_0_1_Mechanical_8010128001.zip TEL-CANBUS Mechanical - DXF]<br>

**[https://cdn.edge.compulab.com/mechanical/TELS/TEL-CANBUS/Mechanical/TEL-CANBUS.PDF TEL-CANBUS Mechanical - PDF]

*3D 360<sup>0</sup> model

**[https://sketchfab.com/3d-models/TEL-CANBUS-populated-e224f85861e3441eb42a39dd24f8fb3f TEL-CANBUS 3D 360<sup>0</sup> model on Sketchfab]
-->


Back to [[fitlet3 FACET Cards]]

[[category:fitlet3]]
[[category:Extension boards]]