Tensor-I22 Troubleshooting: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
|||
| Line 16: | Line 16: | ||
*Unplug peripherals and try to power up with bare minimum, that includes HDD/SSD/USB/TEL devices. | *Unplug peripherals and try to power up with bare minimum, that includes HDD/SSD/USB/TEL devices. | ||
*Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction. | *Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction. | ||
=== 4. Tensor-I22 BIOS reset=== | === 4. Tensor-I22 BIOS reset=== | ||
[[File:TENSOR- | [[File:TENSOR-I22-RTC-RESET.png]] | ||
#Unplug power cable from the Tensor-I22 | #Unplug power cable from the Tensor-I22 | ||
| Line 31: | Line 30: | ||
#Plug power cable (should be automatically turned on) | #Plug power cable (should be automatically turned on) | ||
BIOS settings should be reset to defaults. --> | BIOS settings should be reset to defaults. <!----> | ||
<br /> | <br /> | ||
<br /> | <br /> | ||
Latest revision as of 12:00, 11 August 2025
I can't turn on the Tensor-I22 computer, it doesn't wake up
1. Possible reason: Power supply failure
Solution - Check power supply (PSU)
- Make sure the DC cable is not damaged and connected properly to the machine.
- Make sure the AC cord is properly plugged to both sides (Wall mounted well plugged).
- Trying an alternative adapter could eliminate bad PSU.
2. Possible reason: Memory failure
Solution - Check memory (RAM)
- Verify RAM module is seated firmly in its socket.
- Try to eliminate faulty memory sticks by swapping it with one another.
3. Possible reason: Peripherals failure
Solution - Check Peripherals (HDD/SSD/USB)
- Unplug peripherals and try to power up with bare minimum, that includes HDD/SSD/USB/TEL devices.
- Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.
4. Tensor-I22 BIOS reset
- Unplug power cable from the Tensor-I22
- Remove bottom cover
- Remove the RAM stick
- Plug in power cable (should turn on automatically), and wait ~10 seconds
- Unplug power cable
- Assemble back the RAM stick
- Press the RTC reset button.
- Plug power cable (should be automatically turned on)
BIOS settings should be reset to defaults.