How to enable RAID on Airtop3

From Edge
Revision as of 11:27, 14 September 2025 by Andrey (talk | contribs) (Created page with "* This guide instructs how to enable RAID on Airtop3 == Instructions == * Enter the BIOS menu by pressing ['''DEL'''] on startup * '''On BIOS version 0.30.04 and above''': ** Navigate to "'''Quick-Settings'''" and set "'''RAID'''" to ['''Enabled'''] ** Press F4 to save and exit *'''On BIOS version 0.30.03 and below''': ** Navigate to "'''Chipset'''" -> "'''PCH-IO Configuration'''" -> "'''SATA And RST Configuration'''" ** Set "'''SATA Mode Selection'''" to ['''Intel RST...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • This guide instructs how to enable RAID on Airtop3

Instructions

  • Enter the BIOS menu by pressing [DEL] on startup
  • On BIOS version 0.30.04 and above:
    • Navigate to "Quick-Settings" and set "RAID" to [Enabled]
    • Press F4 to save and exit
  • On BIOS version 0.30.03 and below:
    • Navigate to "Chipset" -> "PCH-IO Configuration" -> "SATA And RST Configuration"
    • Set "SATA Mode Selection" to [Intel RST].
    • Press F4 to save and exit
  • Enter the BIOS menu again by pressing [DEL] on startup
  • Navigate to "Advanced" -> "Intel(R) Rapid Storage Technology"
  • Configure you RAID volume by selecting "Create RAID Volume"
Retrieved from "https://wiki.edge.compulab.com/index.php?title=How_to_enable_RAID_on_Airtop3&oldid=720"